26 mm = 1.024 in, 26 millimeters equals 1.024 inches.
A decimal is what a calculator gives you; a tape measure gives you a fraction. 26 mm = 1.0236″ = 1″ — the fraction reading is how this measurement is actually marked on a rule.
| Rule precision | Fraction reading | As a decimal | Difference from exact |
|---|---|---|---|
| Nearest 1/16 | 1 ″ | 1.0000 | ±0.0236 in / ±0.600 mm |
| Nearest 1/32 | 1 1/32 ″ | 1.0312 | ±0.0076 in / ±0.194 mm |
| Nearest 1/64 | 1 1/32 ″ | 1.0236 | same reading as the row above |
As feet and inches, the same measurement reads 0' 1″.
Paste your measurements below, one per line, and get every value back as a decimal and as the fraction you would read off a rule. Built for working from a cut list rather than a single number.
| millimeters | inches (decimal) | Fraction (1/16) | ft + in |
|---|
All calculations run locally in your browser, nothing is uploaded.
| millimeters (mm) | inches (in) |
|---|---|
| 6 mm | 0.2362 in |
| 16 mm | 0.6299 in |
| 21 mm | 0.8268 in |
| 24 mm | 0.9449 in |
| 25 mm | 0.9843 in |
| 26 mm | 1.024 in |
| 27 mm | 1.063 in |
| 28 mm | 1.102 in |
| 31 mm | 1.22 in |
| 36 mm | 1.417 in |
| 46 mm | 1.811 in |
This page answers the question "what is 26 mm to inches?" directly: the answer is 1.024 in. If you searched the spelling without a space, 26mm to inches, it is exactly the same conversion. For any other value, use the converter above or the full millimeters to inches converter, which includes the formula, a step-by-step explanation and a longer conversion table.
26 millimeters equals 1.024 inches. To get this, multiply 26 by the conversion factor 0.0393701 in per mm.
Type 26 into the converter above and read the result, it is calculated instantly in your browser. The same answer applies whether you write 26 mm to inches or 26mm to inches.
Yes. 26mm to inches and 26 mm to inches are two spellings of the same conversion, the answer is 1.024 in either way.