1.5 mm = 0.0591 in, 1.5 millimeters equals 0.0591 inches.
A decimal is what a calculator gives you; a tape measure gives you a fraction. 1.5 mm = 0.0591″ = 0 1/16″ — the fraction reading is how this measurement is actually marked on a rule.
| Rule precision | Fraction reading | As a decimal | Difference from exact |
|---|---|---|---|
| Nearest 1/16 | 0 1/16 ″ | 0.0625 | ±0.0034 in / ±0.087 mm |
| Nearest 1/32 | 0 1/16 ″ | 0.0591 | same reading as the row above |
| Nearest 1/64 | 0 1/16 ″ | 0.0591 | same reading as the row above |
As feet and inches, the same measurement reads 0' 0 1/16″.
Paste your measurements below, one per line, and get every value back as a decimal and as the fraction you would read off a rule. Built for working from a cut list rather than a single number.
| millimeters | inches (decimal) | Fraction (1/16) | ft + in |
|---|
All calculations run locally in your browser, nothing is uploaded.
| millimeters (mm) | inches (in) |
|---|---|
| 0.5 mm | 0.0197 in |
| 1.5 mm | 0.0591 in |
| 2.5 mm | 0.0984 in |
| 3.5 mm | 0.1378 in |
| 6.5 mm | 0.2559 in |
| 11.5 mm | 0.4528 in |
| 21.5 mm | 0.8465 in |
This page answers the question "what is 1.5 mm to inches?" directly: the answer is 0.0591 in. If you searched the spelling without a space, 1.5mm to inches, it is exactly the same conversion. For any other value, use the converter above or the full millimeters to inches converter, which includes the formula, a step-by-step explanation and a longer conversion table.
1.5 millimeters equals 0.0591 inches. To get this, multiply 1.5 by the conversion factor 0.0393701 in per mm.
Type 1.5 into the converter above and read the result, it is calculated instantly in your browser. The same answer applies whether you write 1.5 mm to inches or 1.5mm to inches.
Yes. 1.5mm to inches and 1.5 mm to inches are two spellings of the same conversion, the answer is 0.0591 in either way.